1. I get this error: /bin/sh: no: command not found
2. How do I compile X-Chat on my Sun OS system?
1. How do I enable identd in X-Chat? (How do I get rid of the ~ in front of my username?)
2. How do I auto join more than one channel with keys?
3. How do I autoconnect and join a channel when X-Chat loads?
4. How do I cut and paste in X-Chat?
5. How do I connect through a proxy?
6. How do I show @ and + in front of nicknames that are Op and Voice when they talk?
7. How do I change the Op and Voice userlist icons and Tree View icons?
8. How do I set different ban types?
9. Why can't I see accented-letters/umlauts/upper-ascii-chars in X-Chat?
10. Why does the timestamp overlap some nicknames?
11. How do I turn on Conference mode where I will not see join or part messages?
12. How can I run the /dccserver command?
13. Why doesn't DCC send work behind a router (IPNat/ADSL)?
14. How do I execute multiple commands in one line?
15. How do I enable Emacs key bindings in XChat?
16. I get this error: "Unknown file type abc.yz. Maybe you need to install the Perl or Python plugin?"
17. How do I play sound files on certain events?
18. How do I auto-load scripts at startup?
19. How do I minimize X-Chat to the System Tray (Notification Area)?
20. Can I select and copy text with the time stamps?
21. What's the deal with opening URLs in XChat on Linux/Unix?
22. Where are the log files saved to?
23. How do I rotate log files every so often?
24. How do I enable graphical smilies (emoticons)?
1. Why does X-Chat leak so much memory?
2. My copy of X-Chat crashes, what can I do?
3. Can I write a new language translation for X-Chat?
If you get an error something like:
Making all in po make[2]: Entering directory `/home/zed/xchat/files/xchat-1.8.7/po' file=./`echo ca | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH no -o $file ca.po /bin/sh: no: command not found make[2]: *** [ca.gmo] Error 127 make[2]: Leaving directory `/home/zed/xchat/files/xchat-1.8.7/po' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/zed/xchat/files/xchat-1.8.7' make: *** [all-recursive-am] Error 2
It means you don't have GNU gettext installed. There are two solutions:
X-Chat uses GNU gettext which in turn requires gmake, either install that and or use ./configure --disable-nls with Sun's own make.
UNIX:
Identd isn't actually apart of X-Chat. You will need to download and install
your own ident server. Most distributions, including Fedora, come with an
ident server program called oidentd. Make sure it is enabled in
/etc/xinetd.conf or read you distribution's documentation.
As an alternative, you can try this experimental identd server: xchat_auth
WINDOWS:
The win32 version of X-Chat comes with a built-in identd server. It is
enabled by default, but can be disabled with /set identd 0.
In the Server list's channel column enter multiple channels and separate them by commas, eg: "#linux,#warez,#chat". Do not put spaces between the channels. If the channels also have keys (passwords), then the syntax is: "#channel1,#channel2,#channel3 key1,key2,key3"
Example: If you want to join #abc and #talk without keys, but #linux with a key of "secret", you would enter: "#linux,#abc,#talk secret".
In the Server list, select the Network you want to auto-connect to, click Edit and turn ON the "Auto connect to this network at startup" checkbox.
It's exactly the same as any other X application. You simply mark the text you want, and then press middle mouse button to paste (if you only have a 2 button mouse, press left and right buttons at once).
Go to the menus, Settings -> Preferences -> Network Setup and fill in the requested information there. Authentication (using a username and password) is only supported for HTTP and Socks5.
To display @ and + characters next to nicknames as they talk, do the following:
In the menus, open up Settings -> Advanced -> Text Events. Find the
Channel Message event in the list. The $3 code can be inserted to
print the user's mode-character (e.g. @ or +). For example, you might want
to change the default:
%C18%H<%H$4$1%H>%H%O$t$2
To:
%C18%H<%H$4$3$1%H>%H%O$t$2
Don't forget to press Enter, so the changes take effect in the
list at the top of the window.
Unix/Linux
The default icons are hard coded (compiled) in. You can override them by creating
some PNG files in ${PREFIX}/share/xchat. ${PREFIX} is usually /usr, so that
would translate to /usr/share/xchat. If you compiled from source tarball without
specifying a prefix, it will be /usr/local instead.
Windows
Your own custom icons can be placed in C:\Program Files\XChat\Icons. Image format
may be PNG or ICO. PNG support on Windows 2000 may require installing GDI+, but it's
standard on XP or newer.
Name Description op.png Userlist: Op hop.png Userlist: Half-Op voice.png Userlist: Voice red.png Userlist: Owner purple.png Userlist: Founder server.png Tree: Server channel.png Tree: Channel dialog.png Tree: Dialog/Query util.png Tree: Utility (Channel List, DCC etc) message.png Tray: Message highlight.png Tray: Highlighted Message fileoffer.png Tray: DCC xchat.png Main XChat icon
Three ways:
Refer to http://xchat.org/encoding/.
Note: Log files are always written in UTF-8/Unicode.
Some networks allow very long nicknames (up to 32 letters). It can be annoying to have the separator bar move too far to the right, just for one long nick. Therefore, it has a set limit for the distance it will move to the right. If you use a large font, you may need to adjust this distance. It is set in pixels, for example:
/set text_max_indent 320
Once you adjust this setting high enough, overlapping timestamps and nicknames should not occur. The adjustment will not take effect immediately, a restart may be needed.
Right-click on the tab you want to change. In the submenu of the channel name, there's a toggle-item "Show join/part messages", simply turn this off.
If you want to turn this option on globally, type:
/set irc_conf_mode 1
Then all channels you join after setting this will start with "Show join/part messages" turned off.
In short you can not do this (easily). This is a mIRC only proprietary feature
that is quite nonstandard. There is no code for doing this, mainly because
/dccserver runs on port 59 which in turn would require running X-Chat as
root. Why do you need this anyway? Just use normal DCC.
Unofficial unix patches are available here.
Update: DCC Server feature has been added in the official Windows release 2.4.1b.
If you are behind a IP-NAT or ADSL router, you will most likely have an address like 192.168.0.1. This address is not usable on the Internet, and must be translated.
When offering a DCC file, xchat will tell the receiver your address. If it says 192.168.0.1, the receiver will not be able to connect. One way to make it send your "real" address is to enable the "Get my IP from IRC Server" option in xchat. This option is available in Preferences -> File Transfers. When you turn it ON, you will have to re-login to the server before it'll take effect.
You will also need to forward some ports for use in DCC send. You may pick almost any port range you wish, for example, in xchat set:
First DCC send port: 4990 Last DCC send port: 5000
This will allow you to send up to ten files at the same time, which should be plenty for most people. Lastly, configure your router/modem to forward ports 4990-5000 to your PC's address. You'll have to consult your router/modem's manual on how to do this.
There are three ways to do this:
The standard Emacs key bindings, such as CTRL-w, CTRL-u etc, are supported by GTK+ 2.0, but normally disabled. If you run Gnome 2, you can re-enable them in your Gnome menu under: Preferences -> Keyboard Shortcuts.
Note: This doesn't work in the latest Gnome (2.8 and newer). In this case, you need to run "gconf-editor", and directly change the key /desktop/gnome/interface/gtk_key_theme from "Default" to "Emacs". Then you need to re-start XChat.
If you don't use Gnome 2, but still want Emacs key bindings, it's beyond the scope of this document. You might find some hints here: GTK+ 2.4.0 release notes.
If you get this error when trying to load a Perl or Python script, it means the plugin for running those scripts isn't loaded.
xchat -p
In the menus, go to: Settings > Preferences > Sound. Select the event you want to make a sound on, then type in a sound filename (or use the Browse button).
You just have to place the scripts into XChat's data directory. XChat
will auto-load scripts if they have the right extension .e.g If a filename
ends in .pl, it will be loaded as a Perl script.
This data directory is different on each platform:
Windows
It depends on your version of Windows and where it stores the
Application Data folder. On Windows XP it is usually:
C:\Documents and Settings\username\Application Data\X-Chat 2\
or simply:
C:\Program Files\XChat\Plugins\
UNIX
~/.xchat2/
Where "~" represents your home directory i.e.: $HOME/.xchat2/
There are two plugins available that allow this:
Unix: SysTray Plugin
Windows: xTray
Note that XChat 2.8.0+ has its own tray feature, but you can disable it in Settings > Preferences > Alerts and still run these plugins, if you prefer.
Yes, but this requires at least XChat 2.6.3. Simply hold down SHIFT while marking the text and the time stamps will be included.
Right-clicking on a URL and selecting Open Link in Browser will open the link
in your "preferred browser". In Gnome, your preferred browser can be changed in System > Preferences > More Preferences > Preferred Applications.
Notes for 2.8.0 or newer:
Everything should just work automatically without any changes from you. Here's how the current
logic works:
Notes for 2.6.8 or older:
If you're not using Gnome, e.g KDE or some other desktop environment, you're fresh out of luck!
Note for Debian and Ubuntu: Integration with Gnome is broken on this distro! Please set
sensible-browser instead. We have no control over what the Debian packagers do, so complain
to them for this screw up. Example:
sudo update-alternatives --set x-www-browser /usr/bin/firefox
More details
While holding down CTRL you can single left-click a URL to open it in your preferred browser. If you really want to change this to plain left-click you can type: /set gui_url_mod 0, provided you have XChat 2.6.6 or newer.
You can also add more items to the right-click menu in XChat: Settings > Advanced > URL Handlers.
For example, you could add an entry like !firefox -a firefox -remote 'openURL(%s,new-tab)'
But this kind of messing around shouldn't be necessary, it just works automatically in Gnome, KDE and Windows with 2.8.0+!
UNIX
~/.xchat2/xchatlogs/
where ~ represents your home directory.
Windows
Windows 98/ME: C:\Windows\Application Data\X-Chat 2\xchatlogs
Windows XP/2000: C:\Documents and Settings\username\Application Data\X-Chat 2\xchatlogs
Requires: 2.6.1+
By default settings, no rotation occurs, your log files will just keep getting larger.
Go to Settings > Preferences > Logging and change the log filename to any one of these:
Setting Example filename that would be written %Y-%m-%d/%n-%c.log 2006-12-30/FreeNode-#channel.log %n/%Y-%m-%d/%c.log FreeNode/2006-12-30/#channel.log %n/%c.log FreeNode/#channel.log (no rotation)
%Y, %m and %d represents the current year, month and day respectively. %n is the
network name, e.g. "FreeNode" or "UnderNet", and finally, %c is the channel. In these
examples, a new log filename and folder would be created after midnight.
You can find more possibilities at http://xchat.org/docs/log/.
This feature is only available in the official Windows XChat release. You have to TICK this feature during installation. If you didn't do this, you can simply run the installer again, and TICK the "Eye Candy Theme" when given the option.
If you want to use the graphical theme, but disable it just for smilies (i.e leave
it ON for things like Join/Part, Modes etc only), type this command and restart:
/set text_emoticons off
The simple answer is, it doesn't! There are some GTK+ pixmap based themes around that leak a lot of memory. Please try using a different theme and see if that resolves the problem. X-Chat itself only allocates about 40kb of memory through malloc()!
Firstly, make sure it's the latest stable version of X-Chat. Stable versions have an EVEN middle number, e.g.: 2.8.0 or 2.8.1. Often late fixes are placed in this directory: 2.8.x patches
If you still experience crashes, you should consider running it through GDB. This will help us find a fix quickly, and it's easy to do! See here.
You sure can, but I don't accept translations directly. They must be done through the Translation Project. All the relevant information should be on that page.